In one week, it's 44CON time again! One of our favourite UK hacker cons. In keeping with our desire to make more hackers, we're giving several sets of training courses as well as a talk this year.
Training: Hacking by Numbers - Mobile Edition
If you're in a rush, you can book here.
We created the course to share our experience testing mobile applications and platforms, and well, because lots of people asked us to. The course shows you how to test mobile platforms and installed applications for vulnerabilities. HBN Mobile provides a pretty complete and practical overview into the methods used when attacking mobile platforms and presents you with a methodology that can be applied across platforms (although we focus on iOS and Android). This course is mostly for existing penetration testers who are new to the mobile area looking to learn how to understand, analyse and audit applications on various mobile platforms.
For more information about the course, and to book a place, head over here.
Workshop: Malware Reverse Engineering
If we were marketing to hipsters, we'd use words like “bespoke” and “handcrafted” to describe this workshop. While it's not made out of yams, it was put together especially for 44con.
Inaki and Siavosh's workshop will cut through the black-magic often associated with reverse engineering and malware. Advanced attacks usually have some form of malware involved, and learning to pull these apart to understand the kill chain is an increasingly vital skill.
Using real malware used in attacks against large corporates, students will look at both behavioural analysis and code analysis, to determine what the malware does.
If you're keen to attend, speak to the 44con crew at the front desk on arrival.
Talk: 'Honey, I'm Home' - Hacking Zwave Home Automation Systems
Behrang and Sahand will be presenting the results of their research into smart homes on day two at 09:30am.
“Smart homes” employing a variety of home automation systems are becoming increasingly common. Heating, ventilation, security and entertainment systems are centrally controlled with a mixture of wired and wireless networking. In 2011 the UK market for home automation products was estimated at GBP 65 million, an increase of 12% on the previous year, with the US market exceeding $3 billion. Zigbee and Z-Wave wireless protocols underpin most home automation systems. Z-Wave is growing in popularity as it does not conflict with existing 2.4GHz WiFi and Bluetooth systems.
Their talk describes the Z-Wave protocol and a number of weaknesses, including how to build a low-cost attack kit to perform packet capture and injection, along with potential attacks on the AES crypto implementation. Bottom line: they can walk up to a house, disable security sensors, then open the front door. LIKE A BOSS
New types of mobile applications based on Trusted Execution Environments (TEE) and most notably ARM TrustZone micro-kernels are emerging which require new types of security assessment tools and techniques. In this blog post we review an example TrustZone application on a Galaxy S3 phone and demonstrate how to capture communication between the Android application and TrustZone OS using an instrumented version of the Mobicore Android library. We also present a security issue in the Mobicore kernel driver that could allow unauthorised communication between low privileged Android processes and Mobicore enabled kernel drivers such as an IPSEC driver.
Mobicore OS :
The Samsung Galaxy S III was the first mobile phone that utilized ARM TrustZone feature to host and run a secure micro-kernel on the application processor. This kernel named Mobicore is isolated from the handset's Android operating system in the CPU design level. Mobicore is a micro-kernel developed by Giesecke & Devrient GmbH (G&D) which uses TrustZone security extension of ARM processors to create a secure program execution and data storage environment which sits next to the rich operating system (Android, Windows , iOS) of the Mobile phone or tablet. The following figure published by G&D demonstrates Mobicore's architecture :
The security critical applications that run inside Mobicore OS are referred to as trustlets and are developed by third-parties such as banks and content providers. The trustlet software development kit includes library files to develop, test and deploy trustlets as well as Android applications that communicate with relevant trustlets via Mobicore API for Android. Trustlets need to be encrypted, digitally signed and then remotely provisioned by G&D on the target mobile phone(s). Mobicore API for Android consists of the following 3 components:
1) Mobicore client library located at /system/lib/libMcClient.so: This is the library file used by Android OS or Dalvik applications to establish communication sessions with trustlets on the secure world
2) Mobicore Daemon located at /system/bin/mcDriverDaemon: This service proxies Mobicore commands and responses between NWd and SWd via Mobicore device driver
3) Mobicore device driver: Registers /dev/mobicore device and performs ARM Secure Monitor Calls (SMC) to switch the context from NWd to SWd
The source code for the above components can be downloaded from Google Code. I enabled the verbose debug messages in the kernel driver and recompiled a Samsung S3 kernel image for the purpose of this analysis. Please note that you need to download the relevant kernel source tree and stock ROM for your S3 phone kernel build number which can be found in "Settings->About device". After compiling the new zImage file, you would need to insert it into a custom ROM and flash your phone. To build the custom ROM I used "Android ROM Kitchen 0.217" which has the option to unpack zImage from the stock ROM, replace it with the newly compiled zImage and pack it again.
1) Android application calls mcOpenDevice() API which cause the Mobicore Daemon (/system/bin/mcDriverDaemon) to open a handle to /dev/mobicore misc device.
2) It then allocates a "Worlds share memory" (WSM) buffer by calling mcMallocWsm() that cause the Mobicore kernel driver to allocate wsm buffer with the requested size and map it to the user space application process. This shared memory buffer would later be used by the android application and trustlet to exchange commands and responses.
3) The mcOpenSession() is called with the UUID of the target trustlet (10 bytes value, for instance : ffffffff000000000003 for PlayReady DRM truslet) and allocate wsm address to establish a session with the target trustlet through the allocated shared memory.
4) Android applications have the option to attach additional memory buffers (up to 6 with maximum size of 1MB each) to the established session by calling mcMap() API. In case of PlayReady DRM trustlet which is used by the Samsung VideoHub application, two additional buffers are attached: one for sending and receiving the parameters and the other for receiving trustlet's text output.
5) The application copies the command and parameter types to the WSM along with the parameter values in second allocated buffer and then calls mcNotify() API to notify the Mobicore that a pending command is waiting in the WSM to be dispatched to the target trustlet.
6) The mcWaitNotification() API is called with the timeout value which blocks until a response received from the trustlet. If the response was not an error, the application can read trustlets' returned data, output text and parameter values from WSM and the two additional mapped buffers.
7) At the end of the session the application calls mcUnMap, mcFreeWsm and mcCloseSession .
The Mobicore kernel driver is the only component in the android operating system that interacts directly with Mobicore OS by use of ARM CPU's SMC instruction and Secure Interrupts . The interrupt number registered by Mobicore kernel driver in Samsung S3 phone is 47 that could be different for other phone or tablet boards. The Mobicore OS uses the same interrupt to notify the kernel driver in android OS when it writes back data.
Analysis of a Mobicore session:
There are currently 5 trustlets pre-loaded on the European S3 phones as listed below:
shell@android:/ # ls /data/app/mcRegistry
The 07010000000000000000000000000000.tlbin is the "Content Management" trustlet which is used by G&D to install/update other trustlets on the target phones. The 00060308060501020000000000000000.tlbin and ffffffff000000000000000000000003.tlbin are DRM related truslets developed by Discretix. I chose to analyze PlayReady DRM trustlet (ffffffff000000000000000000000003.tlbin), as it was used by the Samsung videohub application which is pre-loaded on the European S3 phones.
The videohub application dose not directly communicate with PlayReady trustlet. Instead, the Android DRM manager loads several DRM plugins including libdxdrmframeworkplugin.so which is dependent on libDxDrmServer.so library that makes Mobicore API calls. Both of these libraries are closed source and I had to perform dynamic analysis to monitor communication between libDxDrmServer.so and PlayReady trustlet. For this purpose, I could install API hooks in android DRM manager process (drmserver) and record the parameter values passed to Mobicore user library (/system/lib/libMcClient.so) by setting LD_PRELOAD environment variable in the init.rc script and flash my phone with the new ROM. I found this approach unnecessary, as the source code for Mobicore user library was available and I could add simple instrumentation code to it which saves API calls and related world shared memory buffers to a log file. In order to compile such modified Mobicore library, you would need to the place it under the Android source code tree on a 64 bit machine (Android 4.1.1 requires 64 bit machine to compile) with 30 GB disk space. To save you from this trouble, you can download a copy of my Mobicore user library from here. You need to create the empty log file at /data/local/tmp/log and replace this instrumented library with the original file (DO NOT FORGET TO BACKUP THE ORIGINAL FILE). If you reboot the phone, the Mobicore session between Android's DRM server and PlayReady trustlet will be logged into /data/local/tmp/log. A sample of such session log is shown below:
The content and address of the shared world memory and two additional mapped buffers are recorded in the above file. The command/response format in wsm buffer is very similar to APDU communication in smart card applications and this is not a surprise, as G&D has a long history in smart card technology. The next step is to interpret the command/response data, so that we can manipulate them later and observe the trustlet behavior. The trustlet's output in text format together with inspecting the assembly code of libDxDrmServer.so helped me to figure out the PlayReady trustlet command and response format as follows:
client command (wsm) : 08022000b420030000000001000000002500000028023000300000000500000000000000000000000000b0720000000000000000
client parameters (mapped buffer 1): 8f248d7e3f97ee551b9d3b0504ae535e45e99593efecd6175e15f7bdfd3f5012e603d6459066cc5c602cf3c9bf0f705b
trustlet response (wsm):08022000b420030000000081000000002500000028023000300000000500000000000000000000000000b0720000000000000000
trustltlet text output (mapped buffer 2):
SRVXInvokeCommand command 1000000 hSession=320b4
SRVXInvokeCommand. command = 0x1000000 nParamTypes=0x25
SERVICE_DRM_BBX_SetKeyToOemContext - pPrdyServiceGlobalContext is 32074
SERVICE_DRM_BBX_SetKeyToOemContext iExpectedSize match real size=48
SERVICE_DRM_BBX_SetKeyToOemContext preparing local buffer DxDecryptAsset start - iDatatLen=32, pszInData=0x4ddf4 pszIntegrity=0x4dde4
DxDecryptAsset calling Oem_Aes_SetKey DxDecryptAsset
calling DRM_Aes_CtrProcessData DxDecryptAsset
calling DRM_HMAC_CreateMAC iDatatLen=32 DxDecryptAsset
after calling DRM_HMAC_CreateMAC DxDecryptAsset
By mapping the information disclosed in the trustlet text output to the client command the following format was derived:
08022000 : virtual memory address of the text output buffer in the secure world (little endian format of 0x200208)
b4200300 : PlayReady session ID
00000001: Command ID (0x1000000)
00000000: Error code (0x0 = no error, is set by truslet after mcWaitNotification)
25000000: Parameter type (0x25)
28023000: virtual memory address of the parameters buffer in the secure world (little endian format of 0x300228)
30000000: Parameters length in bytes (0x30, encrypted key length)
05000000: encryption key type (0x5)
The trustlet receives client supplied memory addresses as input data which could be manipulated by an attacker. We'll test this attack later. The captured PlayReady session involved 18 command/response pairs that correspond to the following high level diagram of PlayReady DRM algorithm published by G&D. I couldn't find more detailed specification of the PlayReady DRM on the MSDN or other web sites. But at this stage, I was not interested in the implementation details of the PlayReady schema, as I didn't want to attack the DRM itself, but wanted to find any exploitable issue such as a buffer overflow or memory disclosure in the trustlet.
An attacker would need to know the "sequence number" of an already established netlink connection between a kernel component such as IPSEC and Mobicore driver in order to exploit this vulnerability. This sequence numbers were incremental starting from zero but currently there is no kernel component on the Samsung phone that uses the Mobicore API, thus this issue was not a high risk. We notified the vendor about this issue 6 months ago but haven't received any response regarding the planned fix. The following figures demonstrate exploitation of this issue from an Android unprivileged process :
|0||Memory address of the mapped output buffer in trustlet process (original value=0x08022000)||for values<0x8022000 the fuzzer crashed|
values >0x8022000 no errors
|41||memory address of the parameter mapped buffer in trusltet process (original value=0x28023000)||0x00001000<value<0x28023000 the fuzzer crashed|
value>=00001000 trustlet exits with "parameter refers to secure memory area"
value>0x28023000 no errors
|49||Parameter length (encryption key or certificate file length)||For large numbers the trustlet exits with "malloc() failed" message|
We demonstrated that intercepting and manipulating the worlds share memory (WSM) data can be used to gain better knowledge about the internal workings of Mobicore trustlets. We believe that this method can be combined with the side channel measurements to perform blackbox security assessment of the mobile TEE applications. The context switching and memory sharing between normal and secure world could be subjected to side channel attacks in specific cases and we are focusing our future research on this area.
You've probably never thought of this, but the home automation market in the US was worth approximately $3.2 billion in 2010 and is expected to exceed $5.5 billion in 2016.
Under the hood, the Zigbee and Z-wave wireless communication protocols are the most common used RF technology in home automation systems. Zigbee is based on an open specification (IEEE 802.15.4) and has been the subject of several academic and practical security researches. Z-wave is a proprietary wireless protocol that works in the Industrial, Scientific and Medical radio band (ISM). It transmits on the 868.42 MHz (Europe) and 908.42MHz (United States) frequencies designed for low-bandwidth data communications in embedded devices such as security sensors, alarms and home automation control panels.
Unlike Zigbee, almost no public security research has been done on the Z-Wave protocol except once during a DefCon 2011 talk when the presenter pointed to the possibility of capturing the AES key exchange ... until now. Our Black Hat USA 2013 talk explores the question of Z-Wave protocol security and show how the Z-Wave protocol can be subjected to attacks.
The talk is being presented by Behrang Fouladi a Principal Security Researcher at SensePost, with some help on the hardware side from our friend Sahand Ghanoun. Behrang is one of our most senior and most respected analysts. He loves poetry, movies with Owen Wilson, snowboarding and long walks on the beach. Wait - no - that's me. Behrang's the guy who lives in London and has a Masters from Royal Holloway. He's also the guy who figured how to clone the SecureID software token.
Amazingly, this is the 11th time we've presented at Black Hat Las Vegas. We try and keep track of our talks and papers at conferences on our research services site, but for your reading convenience, here's a summary of our Black Hat talks over the last decade:
Setiri was the first publicized trojan to implement the concept of using a web browser to communicate with its controller and caused a stir when we presented it in 2002. We were also very pleased when it got referenced by in a 2004 book by Ed Skoudis.
A paper about targeted, effective, automated attacks that could be used in countrywide cyber terrorism. A worm that targets internal networks was also discussed as an example of such an attack. In some ways, the thinking in this talk eventually lead to the creation of Maltego.
Our thinking around pentest automation, and in particular footprinting and link analyses was further expanded upon. Here we also released the first version of our automated footprinting tool - "Bidiblah".
In this talk we literally did introduce two proxy tools. The first was "Suru', our HTTP MITM proxy and a then-contender to the @stake Web Proxy. Although Suru has long since been bypassed by excellent tools like "Burp Proxy" it introduced a number of exciting new concepts, including trivial fuzzing, token correlation and background directory brute-forcing. Further improvements included timing analysis and indexable directory checks. These were not available in other commercial proxies at the time, hence our need to write our own.
The second proxy we introduced operated at the TCP layer, leveraging off the very excellent Scappy packet manipulation program. We never took that any further, however.
This was one of my favourite SensePost talks. It kicked off a series of research projects concentrating on timing-based inference attacks against all kinds of technologies and introduced a weaponized timing-based data exfiltration attack in the form of our Squeeza SQL Injection exploitation tool (you probably have to be South African to get the joke). This was also the first talk in which we Invented Our Own Acronym.
In this talk we expanded on our ideas of using timing as a vector for data extraction in so-called 'hostile' environments. We also introduced our 'reDuh' TCP-over-HTTP tunnelling tool. reDuh is a tool that can be used to create a TCP circuit through validly formed HTTP requests. Essentially this means that if we can upload a JSP/PHP/ASP page onto a compromised server, we can connect to hosts behind that server trivially. We also demonstrated how reDuh could be implemented under OLE right inside a compromised SQL 2005 server, even without 'sa' privileges.
Yup, we did cloud before cloud was cool. This was a presentation about security in the cloud. Cloud security issues such as privacy, monoculture and vendor lock-in are discussed. The cloud offerings from Amazon, Salesforce and Apple as well as their security were examined. We got an email from Steve "Woz" Wozniak, we quoted Dan Geer and we had a photo of Dino Daizovi. We built an HTTP brute-forcer on Force.com and (best of all) we hacked Apple using an iPhone.
This was a presentation about mining information from memcached. We introduced go-derper.rb, a tool we developed for hacking memcached servers and gave a few examples, including a sexy hack of bps.org. It seemed like people weren't getting our point at first, but later the penny dropped and we've to-date had almost 50,000 hits on the presentation on Slideshare.
Python's Pickle module provides a known capability for running arbitrary Python functions and, by extension, permitting remote code execution; however there is no public Pickle exploitation guide and published exploits are simple examples only. In this paper we described the Pickle environment, outline hurdles facing a shellcoder and provide guidelines for writing Pickle shellcode. A brief survey of public Python code was undertaken to establish the prevalence of the vulnerability, and a shellcode generator and Pickle mangler were written. Output from the paper included helpful guidelines and templates for shellcode writing, tools for Pickle hacking and a shellcode library.We also wrote a very fancy paper about it all...
For this year's show we'll back on the podium with Behrang's talk, as well an entire suite of excellent training courses. To meet the likes of Behrang and the rest of our team please consider one of our courses. We need all the support we can get and we're pretty convinced you won't be disappointed.
See you in Vegas!
Monday morning, raring for a week of pwnage and you see you've just been handed a new assessment, awesome. The problem? It's a mobile assessment and you've never done one before. What do you do, approach your team leader and ask for another assessment? He's going to tell you to learn how to do a mobile assessment and do it quickly, there are plenty more to come.
Now you set out on your journey into mobile assessments and you get lucky, the application that needs to be assessed is an Android app. A few Google searches later and you are feeling pretty confident about this, Android assessments are meant to be easy, there are even a few tools out there that "do it all". You download the latest and greatest version, run it and the app gets a clean bill of health. After all, the tool says so, there is no attack surface; no exposed intents and the permissions all check out. You compile your report, hand it off to the client and a week later the client gets owned through the application... Apparently the backend servers were accepting application input without performing any authentication checks. Furthermore, all user input was trusted and no server side validation was being performed. What went wrong? How did you miss these basic mistakes? After-all, you followed all the steps, you ran the best tools and you ticked all the boxes. Unfortunately this approach is wrong, mobile assessments are not always simply about running a tool, a lot of the time they require the same steps used to test web applications, just applied in a different manner. This is where SensePost's Hacking by numbers: Mobile comes to the fore, the course aims to introduce you to mobile training from the ground up.
The course offers hands-on training, introducing techniques for assessing applications on Android, IOS, RIM and Windows 8. Some of the areas covered include:
On your next mobile assessment you'll be able to do both static and dynamic analysis of mobile applications. You will know where to find those credit card numbers stored on the phone and how to intercept traffic between the application and the backend servers.
The course: Hacking by numbers: Mobile
When doing wireless assessments, I end up generating a ton of different scripts for various things that I thought it would be worth sharing. I'm going to try write some of them up. This is the first one on decrypting WPA/2 PSK traffic. The second will cover some tricks/scripts for rogue access-points. If you are keen on learn further techniques or advancing your wifi hacking knowledge/capability as a whole, please check out the course Hacking by Numbers: Unplugged, I'll be teaching at BlackHat Las Vegas soon.
When hackers find a WPA/2 network using a pre-shared key, the first thing they try and do most times, is to capture enough of the 4-way handshake to attempt to brute force the pairwise master key (PMK, or just the pre-shared key PSK). But, this often takes a very long time. If you employ other routes to find the key (say a client-side compromise) that can still take some time. Once you have the key, you can of course associate to the network and perform your layer 2 hackery. However, if you had been capturing traffic from the beginning, you would now be in a position to decrypt that traffic for analysis, rather than having to waste time by only starting your capture now. You can use the airdecap-ng tool from the aircrack-ng suite to do this:
airdecap-ng -b <BSSID of target network> -e <ESSID of target network> -p <WPA passphrase> <input pcap file>
However, because the WPA 4-way handshake generates a unique temporary key (pairwise temporal key PTK) every time a station associates, you need to have captured the two bits of random data shared between the station and the AP (the authenticator nonce and supplicant nonce) for that handshake to be able to initialise your crypto with the same data. What this means, is that if you didn't capture a handshake for the start of a WPA/2 session, then you won't be able to decrypt the traffic, even if you have the key.
So, the trick is to de-auth all users from the AP and start capturing right at the beginning. This can be done quite simply using aireplay-ng:
aireplay-ng --deauth=5 -e <ESSID>
Although, broadcast de-auth's aren't always as successful as a targeted one, where you spoof a directed deauth packet claiming to come from the AP and targeting a specific station. I often use airodump-ng to dump a list of associated stations to a csv file (with --output-format csv), then use some grep/cut-fu to excise their MAC addresses. I then pass that to aireplay-ng with:
cat <list of associated station MACs>.txt | xargs -n1 -I% aireplay-ng --deauth=5 -e <ESSID> -c % mon0
This tends to work a bit better, as I've seen some devices which appear to ignore a broadcast de-auth. This will make sure you capture the handshake so airdecap can decrypt the traffic you capture. Any further legitimate disconnects and re-auths will be captured by you, so you shouldn't need to run the de-auth again.